RME Audio Interface (BABYFACEPROFS)

4 years in the past the Babyface Professional once more demonstrated RME’s absolute dedication to superior craftsmanship, not solely in audio circuits and driver growth, but in addition in mechanics. Created with the best precision from a block of aluminum, this high-end transportable interface included newly designed analog and digital circuits. Its progressive power saving applied sciences supplied supreme constancy with no compromises in stage, noise or distortion. Within the new Babyface Professional FS much more enhancements have been carried out: +19 / +4 dBu change on the underside provides a direct solution to scale back the output stage, thus improves SNR for delicate energetic displays, avoids distortion / overload, and helps to maintain TotalMix FX faders close to 0 dB as an alternative of excessive attenuations. Full SteadyClock FS circuit as within the ADI-2 Professional FS for lowest jitter and highest jitter immunity. 3. 5 mm TRS telephones output energy rises from 70 mW to 90 mW. THD of each telephones outputs improved by as much as 10 dB. Makes use of identical output op-amps as ADI-2 Professional now. Output impedance of three. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms. Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB. 6 samples much less latency on the AD aspect by new ADC (5 samples AD, 7 samples DA. It will not get faster. . . ). All of the above enhancements have been achieved with out elevating the models energy consumption. Ok-slot for theft safety. ADI-2 Collection Headphone Energy The 2 headphone outputs, providing TRS and mini-jack sockets in parallel, have fully separate driver phases to completely match high and low impedance headphones, ing pristine sonic outcomes it doesn’t matter what kind of headphone is used. The three. 5 mm TRS telephones output energy rises to 90 mW. THD of each telephones outputs improved by as much as 10 dB. and makes use of identical output op-amps as ADI-2 Professional now. Lastly the output impedance of three. 5 mm TRS was lowered from 2 Ohms to 0. 1 Ohms. Full vary seize – Improved Mic & Line Inputs For the primary I/O RME have designed a XLR socket, which integrates seamlessly into the housing and saves house. Two digitally managed preamps present individually switchable 48V phantom energy. These circuits characteristic a achieve vary of 76 dB, adjustable in steps of 1 dB, together with a relay-driven PAD, leading to distinctive EIN (Equal Enter Noise) efficiency in addition to line overload safety, and sufficient achieve for even the bottom stage microphones. Babyface Professional’s extremely environment friendly design nearly by no means requires an exterior energy provide – it’s completely steady on USB 3 bus energy, and likewise most USB 2 ports, with no degradation in any technical specification. This makes it good for cell recording, even with a pair of your favorite condenser microphones. The excellent characteristic set continues with an optical TOSLINK I/O; use as both an ADAT port with SMUX help or SPDIF for classes as much as 192 kHz. Together with an exterior ADAT converter, the Babyface Professional totally helps 12 analog inputs in addition to 12 outputs, making it superb for each reside and studio multi-track functions. You possibly can plug any instrument, line or excessive impedance, into Babyface Professional’s jack inputs 3 & 4. Document your guitar on the go, with no further {hardware} required. MIDI I/O by way of an included breakout cable completes the bundle. Extra Professional stage Efficiency with SteadyClock FS In digital audio, the clock frequency is an important issue, because it creates the correlation between the audio bits and the time reference. Sadly, the clock frequency will not be all the time as steady as desired. The Babyface Professional FS gives the total SteadyClock FS circuit as within the ADI-2 Professional FS for lowest jitter and highest jitter immunity. Wonderful efficiency in all clock modes and Excessive High quality Analog Conversion to listen to your combine as it’s. Digital format conversion in RME merchandise are completed with none loss or degredation, and SteadyClock FS ensures your sonic picture won’t ever expertise degredation. This helps to optimize recordings and mixes as a result of the soundstage has extra depth and readability.

+19 / +4 dBu change on the underside provides a direct solution to scale back the output stage, thus improves SNR for delicate energetic displays, avoids distortion / overload, and helps to maintain TotalMix FX faders close to 0 dB as an alternative of excessive attenuations.
Full SteadyClock FS circuit as within the ADI-2 Professional FS for lowest jitter and highest jitter immunity.
3. 5 mm TRS telephones output energy rises from 70 mW to 90 mW. THD of each telephones outputs improved by as much as 10 dB. Makes use of identical output op-amps as ADI-2 Professional now. Output impedance of three. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms.
Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB.
6 samples much less latency on the AD aspect by new ADC (5 samples AD, 7 samples DA. It will not get faster. . . ).